Bear Creek Arsenal (BCA) is a firearms manufacturer out of Sanford, North Carolina that is a reminds me of a smaller Palmetto State Armory. BCA makes AR15, AR10, and 10/22 pattern rifles and components that are well built, reliable and affordable. They wanted to send me one of their rifles to test but due to California’s draconian (and sometimes contradictory) regulations they could only send me a 22LR upper receiver.

The BC-22 is a complete .22LR all metal upper receiver with a direct blowback action. The model they sent me had a 16″ long free float barrel with a 1:16 twist. It had a full length aluminum M-lok handguard with a small section of 1913 Picatinny rail on each end for front sights and mounting optic extensions.

The BC-22 complete upper was originally designed to run CMMG magazines but they told me that CMMG recently changed the feeder on their mags, so that they no longer ran reliably in the BCA upper. Instead they sell Black Dog magazines which were patterned after the original CMMG mags. BCA sent me two to test. I compared them to some CMMG 22LR mags I bought 3 years and did notice some differences in thickness of the feed lips and a notch not present in the Black Dog mags. I ran the CMMG mags on the BCA upper and it ran without issue, so maybe I’m lucky?

The BC-22 mounts like any MilSpec AR upper. The biggest differences in manual of arms is the lack of the AR rear charging T-handle. Instead, the BCA 22LR upper has a right side charging handle screwed directly onto the bolt. My AR bolt hold open paddle was partially non-functional; it did not hold the bolt completely open but it did prevent the bolt from falling into battery until it was disengaged. The BC-22 does have last round hold open with a mag inserted.

Disassembly of the upper and bolt for cleaning is different than on a standard AR. First the charging handle has to be unscrewed and removed with an hex key. Then a rear thumb locking bolt, where the T-handle usually sits on an AR upper, needs to be unscrewed. Once the charging handle and locking bolt are removed, the whole bolt assembly including recoil spring can be removed for cleaning.

I tested the BC-22 with bulk .22 ammo: Federal AutoMatch, Aguila Super Extra HV, and CCI standard velocity. Be sure to clean your barrel before testing because my barrel and handguard had a light coat of sticky lubricant to prevent corrosion. My first 20-30 rounds of AutoMatch grouped so horribly that I thought the barrel was damaged during shipping. It wasn’t until the barrel was properly cleaned and then lead fouled by 30-40 rounds of ammo that the groups tightened and normalized. Aguila and CCI grouped much better from the get go than AutoMatch, though this rifle seems to accentuate fliers, throwing them in the most random of directions.

There’s a lot of valid reasons to want an AR that can shoot 22LR: lower cost to train and shoot, greater availability of ammo (except during a pandemic), lower recoil, etc. The BC-22 is inexpensive for a complete AR upper; about as much as a base model 10/22. Unlike buying a 10/22, with the BC-22 you can shoot with the same rifle, optics, accessories, and sling as your War Rifle; but you can train with it for pennies. To put it another way, BC-22 costs about as much as 10 boxes of .223 ammo. So you could pay off the cost of a BC-22 in a good afternoon at the range.

BUY IT

Bear Creek Arsenal affiliate https://alnk.to/faC03Fs

SPECS