Tag Archives: flashlight

Boruit V1 Micro EDC

I recently reviewed the V3 light from Boruit which claimed to output 900 lumens but fell far short of those numbers in my estimation. So I was surprised when Boruit sent me their V1 to test. Unlike the V3, this box claims a more modest 400 lumens and I discovered it came far closer to keeping that promise.

The V1 has a USB thumb-drive form factor and this model has a glow-in-the dark translucent body. It comes in a similar box to the V3, with a USB-C charging cable, keychain ring, and instruction manual (though it was really more of a spec sheet). The flashlight is activated by 2 quick-presses and turned off with a long press. You can cycle between ECO-LOW-MED-HIGH brightness modes with a quick press and the unit also has a TURBO mode which is activated by a continuous press.

Like the V3, the unit also has side LEDs which can function as a signal light and table top lamp when head-standing it from it’s squared off metallic crown. Modes include: WHITE-BLINKING WHITE-UV-RED-BLINKING RED-RED/BLUE BLINK-WARM WHITE

After charging it over night, I conducted an endurance test at high brightness mode and it stayed on for about 82 minutes, slowly dimming as the battery ran down. Recharging it again I ran a lumen test. I was unable to confirm its 400 lumen TURBO mode due to my testing box must be completely sealed to get a more accurate reading.

Testing in HIGH mode, the unit briefly put out a maximum brightness of about 300 lumens after a 1-minute warm up. This was higher than the 220 lumen specs on the box. But the unit does not stay that brightness but instead drops steadily to about 80 lumens which is somewhere between HIGH and MEDIUM output as stated in the product specs.

Unfortunately inflated lumen numbers is par for the course in how budget EDC lights are marketed today. These brightness numbers are disappointing to anybody who bought this flashlight expecting 400 lumens but actually better than expected from a micro-EDC light no matter its price point.

The V1 easily passed my 6ft drop test and high-pressure water test. Its real world performance was good to above average, fully illuminating an interior hallway with a wide flood pattern. Outdoors this flood limited its throw to about 50ft-60ft. But for a thumb-sized flashlight that could do this for over an hour, this is pretty impressive. Even more so for a thumb-sized EDC that costs less than $17 as of this writing.

The Boruit V1 EDC is available on Amazon through this affiliate link: https://amzn.to/3BGIhX7

V3 Micro EDC Light

The current trend in EDC lights is creating ever smaller flashlights that are ever brighter. I was sent a BORUIT V3 EDC light to test and review. This micro-EDC light is the size of a Car alarm keychain dongle and its packaging promises to output up to 900 lumens.

The device has a smoke colored clear polymer body with two buttons and a covered SUB-C charging port. On one end is a twin-head LED emitters and the other end has a keychain loop and a rare-earth magnet end that allows the light to magnetically mounted and used hands-free.

One button activates the primary twin-lights. The device has high, medium, low, and endurance (candlelight) modes. Double-tap for continuous light, short tap for momentary, and long-press activates the devices Turbo mode which BORUIT claims is 900 lumens. It is very bright but in my testing, I suspect this number is inflated.

The other button double-taps to activate small set of LEDs. There is a high, low, red, blinking-red, and blinking-red/blue modes. This appears to be for specialized low-light work when tail-standing, magnetically mounted, or as an emergency signal.

I drop tested and water-jet tested the unit which passed without issue. The beams from the twin-headed unit cast a wide flood pattern that are still able to illuminate objects from over 100ft away. Unfortunately, in lumen testing the unit fell short.

I fully charged the unit overnight and let left it on high output for over 1-minute to stabilize the battery. The device specs claim the unit is 650 lumens on high mode. I measured 360 lumens. I also tested the unit in low which claims to be 150 lumens but I recorded only 50 lumens (less than half its stated output). Based on these numbers, I doubt it is capable of outputting 900 lumens in turbo.

Despite its over-inflated lumen numbers, the light is perfectly sized as an EDC or emergency light. For those that don’t want to carry in their pocket, it’s form factor makes it easy to clip-on to accessories or keys. And given it’s features is a reasonable purchase for less than $20 (some clones for even less than $15).

Available on Amazon through my Affiliate Link: https://amzn.to/3yPHlOL

Maglite, the one flashlight you need

How to calculate the lumen output of any flashlight. If you ever wondered if those crazy high lumen claims of those cheap Chinese lights are legit, use this US-made Maglite to check it yourself. Just download a Light Meter App to your phone and use this 100-lumen penlight as your benchmark. Because it’s 100 lumens, it’s easy math to determine how many times brighter the suspect light SHOULD be.

Before there was Surefire, Streamlight, or even the term ‘Tac Light’, there was Maglite. Founded in 1979, Maglite was the first mass-market duty flashlight made with aerospace-grade aluminum, and pioneering the use of ultra-bright bulb technology.

PRODUCT LINK

Amazon https://amzn.to/3nELQUL

APPS

Android: https://play.google.com/store/apps/details?id=com.tsang.alan.lightmeter&hl=en_US&gl=US

Apple: https://apps.apple.com/us/app/lux-light-meter-pro/id1292598866

Klarus E2 Review: 7 Day Runtime?

https://rumble.com/vbtsuh-klarus-e2-review-can-it-run-for-7-days.html

The Klarus E2 is an aluminum-bodied EDC wilderness survival flashlight is scarcely bigger than the 18650 battery that powers it. With a max output of 1600 lumens and at low power, a max runtime of 168hrs (in my testing it fell short by 54hrs). Let’s take a look at what you get for a street price of about $70.

AMAZON LINK: https://amzn.to/36NhetZ