Tag Archives: ezshot

Airsoft, Shooting Sports

EZshoot 1-6×24 LPVO

I had to re-edit and re-upload this video because of goof on my part. I’ve been mispronouncing the name of the brand. It’s not EZshot, it’s EZshoot.

EZshot is a brand best known for budget firearms accessories like barrel snakes, red dots, and weapon lights and not always in a good way. It came as a bit of a surprise that they reached out to me with an 1-6x LPVO. I didn’t have high hopes as to optical qualities and build quality but I was delightfully surprised.

The scope came in completely blank black box which was not a good start. Like Feyachi and MidTen, most of EZshots product are generic and often lack any branding on the product itself. I assume they buy their products from the same factories and just market them under their brand name.

Inside, I found an LPVO that we pretty well put together. The elevation and windage turrets are capped. The turrets underneath, looked a bit cheap but had nice loud clicks. Overall the scope looked good; not $500 scope quality but more than its $109 price on Amazon.

At the range, I found the image at 6x to be decent. Not amazing but not bad. It had a fair bit of chromatic aberration, edge distortion, and lacked some resolution and brightness. But the image was sharp enough to confidently engage man sized targets from 50-100 yards.

It’s eye relief and exit pupil were average for a budget LPVO. There are better scopes but almost none it’s price tier. I had no trouble brining it up to my eye and quickly acquired my target. I found it’s reticle to be better than I expected, though its outer cross hairs should have been thinner.

Without a doubt, there are better and more durable LPVOs. But for the price, this is great optic for a range baby.

ONLINE RETAIL SOURCES

Amazon Affiliate: https://amzn.to/3DKqAq2

Manufacturer Specs

ITEM WEIGHT‎15.2 Ounces
MATERIAL‎Aluminum
MAGNIFICATION MAXIMUM‎6 x
MAGNIFICATION MINIMUM‎1 x
COMPATIBLE DEVICES‎Rifle
MOUNTING TYPE‎Cantilever Mount
NIGHT VISION‎No
EYE RELIEF‎3.94 Inches
PRODUCT DIMENSIONS‎9.65″L x 2.76″W x 2″H

Product Reviews, Shooting Sports

EZshot Scope Level

There are many reasons that your shots can go amiss. When you’ve zoned in, concentrating on your target, your horizon isn’t often visible in your scope. Or your paper target isn’t posted up perfectly square in the first place and you are subconsciously aligning your reticle to your target. It’s all too easy to “cant”, slightly turning your rifle so your scope above it is leaning slightly left or right to the center line of your bore: this is Scope Cant.

This is why almost all competitive long range shooters mount bubble levels on their scopes. This allows them to quickly and easily visually check when they’ve accidentally canted their rifles and correct for it. EZshot sent me a sample of their 30mm bubble level to test and evaluate. EZshot makes these levels in common 25mm (1″) and 30mm tube sizes, as well as larger 34mm, and 35mm.

Upon first inspection, I was bit surprised at how much larger this level was compared to the Arken levels on my EP5 and SH4. Despite its beefy size, the entire rig weighed 1.63oz (46.3g). The bubble tube is twice as large as typical bubble levels, which should make its measurements more physically accuracy, as well as making it easier to visibly read.

It mounts very much like a scope ring with two hex screws on opposite sides of the mounting ring. The kit comes with an Allen wrench. I chose to mount mine forward my turrets to allow me clear views of my scope controls and turret markings.

EZshot Scope Levels are available on Amazon through my Affiliate LInk: https://amzn.to/3xInW1s