I’ve used various laser bore sighter devices to help me zero out a new scope but they can be a bit finicky and more than once, the battery died. Xaegis Tactical sent me a an traditional non-electronic bore sighter to test. These optical bore sighters sits on the end of your barrel and provide an alignment grid on visible when looking through your scope.
The kit comes with a 12 different caliber adapters, from .17 cal to .50 cal and a 20 ga-12ga shotgun bore adapter. These adapter arbor stems screw into the optical lens unit and are then fitted into your bore. Looking through your scope, you are presented with a 20×20 grid to help you align the reticle of your scope.
In my testing, using the kit on a Ruger 10/22 firing Aguila Super Extra High Velocity 40gr CPRN, was able to get on paper (30″x36″ paper target) at 100yrds. The impacts were low and to the left of bullseye by 15″-20″. This is not unexpected as target distance, barrel type, and bullet ballistics will alter the impact point from dead center of your bore. But being able to get on paper with my first shot meant I could easily make fine adjustments to zero out the scope.
Available on Amazon. Help support my videos buy using my a Affiliate link https://amzn.to/3XwKzA1
